adding cloud camera to apple airport wifi

Adding cloud camera to apple airport wifi manual#
Adding cloud camera to apple airport wifi full#

This is what yo want for a roaming type network. The AirPort Express was the first easy way to stream music to devices in your home using AirPlay. The AirPort Extreme, AirPort Express, and Time Capsule were easy-to-use routers and Wi-Fi access points that fit perfectly into the Apple ecosystem.

This is telling you that the AirPort Utility has determined that you will be extending using an Ethernet connection between the devices. In April 2018, Apple announced that it was discontinuing AirPort, its line of home Wi-Fi products. The next screen should have the title: Setting up the AirPort Extreme to extend using Ethernet.I suggest using a name that uses 16 alphanumeric character or less and does not include either spaces or special characters. Enter a base station name for the Extreme, and then, click on Next.Click on the Extreme and the AirPort Utility should now start up.The Extreme should show up under the title: New AirPort Base Station in the Wi-Fi's dropdown menu. With the Extreme now connected to power, on your Mac, click on the Wi-Fi icon on the macOS menu bar. Apple has officially ended development on its AirPort line of products, which includes the AirPort Express (99), the AirPort Extreme (199.Once completed, connect the Extreme to power. Just place it in range of your primary base station an AirPort Extreme, AirPort Time Capsule, or another AirPort. If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Perform a 'factory default' reset on the Extreme base station. Here is the information from Apples spec sheet about the AirPort Express: Extend an existing WiFi network’s range.The Ethernet cable, coming from the wall outlet is to connect to the Extreme's WAN (circle-of-dots) port.The DSL gateway is your 'main' router and the Extreme will be extending it for this roaming network.Both devices must broadcast their own Wi-Fi network, but use the same Network Name (aka, SSID) and use the same wireless security type and password.That is, both its NAT & DHCP services must be disabled. The 'extending' wireless access point, in this case the AirPort Extreme, must be reconfigured as a bridge.The 'main' Internet router, in this case your DSL gateway, must perform as a router.The wireless access points must be interconnected by Ethernet.In this type of network, the following would be required: Overall, I found this camera to be a good, affordable choice for my security needs.Since you plan on connecting the AirPort Extreme base station back to the DSL gateway by Ethernet, then you will want to configure both devices for a roaming type network. The solar panel has an attached 9ft long cable, allowing it easily be placed in any suitable area and direction for capturing bright sunlight for keeping the internal batteries fully charged. There are 2 mounting brackets enclosed, one for the camera and one for the solar panel. I do leave the LED light switch on, however, which automatically turns the lights on only when motion is detected. I keep the siren completely switched off, due to the close proximity of my next-door neighbor. The iegeek app allows the LED lights and the siren to be independently switched on or off, which I found very useful. The live camera image can be accessed on my cell-phone from anywhere. The 2 photos I included show actual image quality in the daytime and at night. Since this camera is wireless, there is no need to locate it near an electrical power source (Yay!!). The WiFi connection remained strong, no dropouts. I inserted a 128gb micro SD card in the provided slot to allow for elongated recordings, then mounted the camera on an outside post that faces my car, carport, and rear entrance to my home. Then my WiFi router that was in the same room located it easily.

The camera beeps, indicating it read the barcode successfully.

Adding cloud camera to apple airport wifi manual#

Following the instructions, I added the camera device, then scanned the barcode located in the owner’s manual with the camera lens.

Adding cloud camera to apple airport wifi full#

The next day, the red charging light on the front had turned green, which indicated a full charge. I first charged the camera overnight using the provided cable and a standard phone charging adapter. It uses iegeek’s own app, rather than the “standard” CloudEdge app. Setting up this battery-operated camera was a cinch.